S5735S-S24T4S-A

Memory (RAM)

1GB

Flash

 512 MB in total. To view the available flash memory size, 

 run the display   version command.

Mean time between failures

 (MTBF)

69.42 years

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±7 kV

Power supply surge 

protection

·     Using AC power modules: ±6 kV in differential   mode, 

       ±6 kV in common mode

·     Using DC power modules: ±2   kV in differential mode,

       ±4 kV in common mode

Dimensions (H x W x D)

·     Basic dimensions

      (excluding the parts protruding from the body):

·      43.6 mm x 442.0 mm   x 420.0 mm 

      (1.72 in. x 17.4 in. x16.5 in.)

·      Maximum dimensions (the depth is   the distance from 

       ports on the front panel to the handle on the rear panel):             

       43.6 mm x 442.0 mm x 227.0 mm 

      (1.72 in. x 17.4 in. x 17.49 in.)

Weight (with packaging)

7.89 kg (17.4 lb)

Stack ports

Any 10/100/1000BASE-T ports or 1000BASE-X ports 

(applicable in V200R019C10 and later versions)

RTC

Supported

RPS

Not supported

PoE

Not supported

Rated voltage range

·           AC input: 100 V     AC to 240 V AC, 50/60 Hz

·           High-Voltage DC input: 240 V DC

·           DC input: -48 V DC to -60 V DC

Maximum voltage range

·           AC input: 90 V   AC to 290 V AC, 45 Hz to 65 Hz

·           High-Voltage DC   input: 190 V DC to 290 V DC

·           DC input: -38.4   V DC to -72 V DC

Maximum power 

consumption 

(100% throughput, 

full speed of fans)

44 W

Typical power consumption 

(30% of traffic load, tested 

according to ATIS   standard)

     29 W

Operating temperature

-5°C to 50°C (23°F to 122°F) 

at an altitude of 0-1800 m (0-5906 ft.)

NOTE:

When the altitude   is 1800-5000 m (5906-16404 ft.), 

the highest   operating temperature reduces by 1°C (1.8°F) 

every time the   altitude increases by 220 m (722 ft.).

The switch cannot be started when the ambient 

temperature is lower than 0°C (32°F).

Short-term operating

 temperature

5°C to +55°C (23°F to 131°F) at an altitude of 0-1800 m 

(0-5906 ft.)

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), 

the highest operating temperature reduces by 1°C (1.8°F) 

every time the altitude increases by 220 m (722 ft.).

The equipment can operate beyond the normal operating 

temperature range for a short-term period, but the following 

conditions must be met:

·         The equipment operates at a temperature of over 

   50°C (122°F) consecutively for at most 96 hours in one   year.

·         The equipment operates at a temperature of over

   50°C (122°F) for a total of no more than 360 hours in one   year.

·         The equipment operates at a temperature of over 50°C 

  (122°F) for no more in 15 times in one year.

The equipment may be damaged or experience unexpected 

exceptions if any of the preceding limits is exceeded.

The equipment   cannot start when the temperature is lower 

than 0°C (32°F).   The maximum distance of optical modules 

used in these   conditions cannot exceed 10 km.

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal

 temperature 

(27°C, sound power)

<58.9 db (A)

Relative humidity

5% to 95%, noncondensing

Operating altitude

0-5000 m (0-16404 ft.)

Certification

·           EMC certification

·           Safety certification

·           Manufacturing certification

Part number

98010939

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, 

hold down the button for at least 6 seconds.

To reset the switch, press the button.Resetting the 

switch will cause service interruption. 

Exercise caution when you press the PNP button.

7

Ground screw

NOTE:

It is used with a ground cable.

8

Power module slot 1

NOTE:

Applicable power module:

·         PAC60S12-AR

         (60 W AC Power Module)

·        PDC1000S12-DB

          (1000 W DC Power Module)

·         PDC180S12-CR

          (180 W DC Power Module) 

         (applicable in V200R020C00

          and later versions)

9

Power module slot 2

NOTE:

Applicable power module:

·         PAC60S12-AR

         (60 W AC Power Module)

·        PDC1000S12-DB

          (1000 W DC Power Module)

·         PDC180S12-CR

          (180 W DC Power Module) 

         (applicable in V200R020C00

          and later versions)

    OMXD30000

Huawei Optical Transceiver OMXD30000, SFP+, 10G, Multi-mode Module

 (850nm, 0.3km, LC)

   SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module (1310nm,  10km, LC)

Transceiver, QSFP+, 1310nm, 41.25Gbps, -7dBm, 2.3dBm,   -11.5dBm,

 LC, SMF, 10

  eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module (850nm,0.5km, LC)