S5735S-L48P4X-A1

Dimensions  without 

packaging (H x W x D) 

[mm(in.)]

Basic   dimensions (excluding the parts protruding from the body): 

43.6 mm x 442.0 mm   x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.)

Maximum   dimensions (the depth is the distance from ports on the 

front panel to the   parts protruding from the rear panel): 

43.6 mm x 442.0 mm x 227.0 mm (1.72   in. x 17.4 in. x 8.94 in.)

Dimensions with 

packaging 

(H x W x D) [mm(in.)]

90.0 mm x   550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)

Chassis height   [U]

1 U

Weight without   

packaging [kg(lb)]

3.23 kg (7.12   lb)

Weight with   

packaging [kg(lb)]

4.28 kg (9.44   lb)

Typical power   

consumption [W]

58.7 W

Typical heat   

dissipation 

[BTU/hour]

200.29   BTU/hour

Maximum power   

consumption [W]

·           Not providing the PoE function: 76.1 W

·           100% PoE loads: 456.1 W (PoE: 380 W)

Maximum heat   

dissipation

 [BTU/hour]

·           Not providing the PoE function: 259.66

·           100% PoE loads: 155.26

MTBF [year]

44.03 year

MTTR [hour]

2 hour

Availability

>0.99999

Noise at normal 

temperature 

(acoustic power)

 [dB(A)]

50 dB(A)

Noise at normal 

temperature 

(acoustic pressure) 

[dB(A)]

38.2 dB(A)

Number of card slots

0

Number of   power slots

0

Number of fans  modules

2

Redundant 

power supply

Not supported

Long-term 

operating 

temperature

 [°C(°F)]

-5°C to +50°C   (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.)

Short-term 

operating 

temperature 

[°C(°F)]

-5°C to +55°C   (23°F to 131°F) at an altitude of 0-1800 m (0-5906 ft.)

Restriction on   

the operating 

temperature 

variation rate 

[°C(°F)]

When the   altitude is 1800-5000 m (5906-16404 ft.), the highest 

operating temperature   reduces by 1°C (1.8°F) every time the altitude 

increases by 220 m (722 ft.).

The equipment can operate beyond the normal operating temperature 

range for a short-term period, but the following conditions must be met:

      ·      The equipment operates at a temperature of over 50°C 

            (122°F) consecutively for at most 96 hours in one year.

·      The equipment operates at a temperature of over 50°C 

      (122°F) for a total of no more than 360 hours in one year.

·      The equipment operates at a temperature of over 50°C

      (122°F) for no more in 15 times in one year.

The equipment   may be damaged or experience unexpected 

exceptions if any of the preceding   limits is exceeded.

The equipment   cannot start when the temperature is lower than 

0°C (32°F). The maximum   distance of optical modules used in these 

conditions cannot exceed 10 km.

Storage 

temperature [°C(°F)]

-40°C to +70°C   (-40°F to +158°F)

Long-term

operating relative 

humidity [RH]

5% to 95%,   noncondensing

Long-term

operating altitude

 [m(ft.)]

0-5000 m   (0-16404 ft.)

Storage 

altitude [m(ft.)]

0-5000 m   (0-16404 ft.)

Power supply 

mode

AC built-in

Rated input 

voltage [V]

·           AC input: 100 V AC to 240 V AC, 50/60 Hz

·           High-Voltage DC input: 240 V DC

Input voltage 

range [V]

·           AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz

·           High-Voltage DC input: 190 V DC to 290 V DC

Maximum input 

current [A]

6 A

Memory

512 MB

Flash memory

512 MB

Console port

RJ45

Eth Management 

port

Not supported

USB

Supported

RTC

Not supported

RPS input

Not supported

Service port   

surge protection 

[kV]

Common mode:   ±7 kV

Power supply 

surge protection 

[kV]

±6 kV in   differential mode, ±6 kV in common mode

Types of fans

Built-in

Heat dissipation 

mode

Heat   dissipation with fan, intelligent fan speed adjustment

Airflow direction

Air intake   from left and front, air exhaustion from right

PoE

Supported

Certification

EMC   certification

Safety   certification

Manufacturing   certification

3

   One console port

4

   One USB port

5

  One PNP button

  NOTICE:

To restore the factory settings   and reset the switch,

hold down the button for   at least 6 seconds.

To reset the switch, press the   button.Resetting 

the   switch will cause service interruption. 

Exercise caution when you press   the PNP button.

6

   Ground screw

   NOTE:

   It is used with a   ground cable.

7

  Jack for AC power cable   locking strap

  NOTE:

 The AC power cable locking strap is   not 

delivered with the switch.

8

   AC socket

   NOTE:

   It  is  used  with  an  AC   power  cabe .

    OMXD30000

Huawei Optical Transceiver OMXD30000, SFP+, 10G, Multi-mode Module

 (850nm, 0.3km, LC)

   SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module (1310nm,  10km, LC)

Transceiver, QSFP+, 1310nm, 41.25Gbps, -7dBm, 2.3dBm,   -11.5dBm,

 LC, SMF, 10

  eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module (850nm,0.5km, LC)