S5735S-L48P4S-A1

Dimensions without 

packaging 

(H x W x D) [mm(in.)]

Basic dimensions (excluding the parts protruding from the body): 

43.6 mm x 442.0 mm   x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.)

Maximum dimensions (the depth is the distance from ports on 

the front panel to the   parts protruding from the rear panel): 

43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)

Dimensions with 

packaging 

(H x W x D) [mm(in.)]

90.0 mm x   550.0 mm x 360.0 mm 

(3.54 in. x 21.65 in. x 14.17 in.)

Chassis height   [U]

1 U

Weight without   

packaging [kg(lb)]

3.23 kg (7.12   lb)

Weight with   

packaging [kg(lb)]

4.28 kg (9.44   lb)

Typical power   

consumption [W]

58.7 W

Typical heat   

dissipation 

[BTU/hour]

200.29   BTU/hour

Maximum power

consumption [W]

·           Not providing the PoE function: 76.1 W

·           100% PoE loads: 456.1 W (PoE: 380 W)

Maximum heat

dissipation 

[BTU/hour]

·           Not providing the PoE function: 259.66

·           100% PoE loads: 155.26

MTBF [year]

44.9 year

MTTR [hour]

2 hour

Availability

>0.99999

Noise at normal

temperature 

(acoustic power)

 [dB(A)]

50 dB(A)

Noise at normal 

temperature 

(acoustic pressure)

 [dB(A)]

38.2 dB(A)

Number of 

card slots

0

Number of 

power slots

0

Number of 

fans modules

2

Redundant   

power supply

Not supported

Long-term 

operating 

temperature

 [°C(°F)]

-5°C to +50°C   (23°F to 122°F) at 

an altitude of 0-1800 m (0-5906 ft.)

Short-term 

operating 

temperature 

[°C(°F)]

-5°C to +55°C   (23°F to 131°F) at 

an altitude of 0-1800 m (0-5906 ft.)

Restriction on

the operating 

temperature 

variation rate

[°C(°F)]

When the   altitude is 1800-5000 m (5906-16404 ft.), the highest

operating temperature   reduces by 1°C (1.8°F) every time the 

altitude increases by 220 m (722 ft.).

The equipment   can operate beyond the normal operating 

temperature range for a short-term   period, but the following 

conditions must be met:

·           The equipment operates at a temperature of over 

            50°C   (122°F) 

            consecutively for at most 96 hours in one year.

·           The equipment operates at a temperature of over 

            50°C   (122°F) 

            for a total of no more than 360 hours in one year.

·           The equipment operates at a temperature of over 

            50°C   (122°F) 

            for no more in 15 times in one year.

The equipment   may be damaged or experience unexpected 

exceptions if any of the preceding   limits is exceeded.

The equipment   cannot start when the temperature is lower 

than 0°C (32°F). The maximum   distance of optical modules 

used in these conditions cannot exceed 10 km.

Storage 

emperature [°C(°F)]

-40°C to +70°C   (-40°F to +158°F)

Long-term operating

 relative humidity [RH]

5% to 95%,   noncondensing

Long-term

 operating 

altitude [m(ft.)]

0-5000 m   (0-16404 ft.)

Storage altitude

 [m(ft.)]

0-5000 m   (0-16404 ft.)

Power supply

mode

AC built-in

Rated input 

voltage [V]

·           AC input: 100 V AC to 240 V AC, 50/60 Hz

·           High-Voltage DC input: 240 V DC

Input voltage

range [V]

·           AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz

·           High-Voltage DC input: 190 V DC to 290 V DC

Maximum input 

current [A]

6 A

Memory

512 MB

Flash memory

512 MB

Console port

RJ45

Eth Management 

port

Not supported

USB

Supported

RTC

Not supported

RPS input

Not supported

Service port 

surge protection

 [kV]

Common mode:   ±7 kV

Power supply

surge protection

 [kV]

±6 kV in   differential mode, ±6 kV in common mode

Types of fans

Built-in

Heat dissipation

 mode

Heat   dissipation with fan, intelligent fan speed adjustment

Airflow  direction

Air intake   from left and front, air exhaustion from right

PoE

Supported

Certification

EMC   certification

Safety   certification

Manufacturing   certification

3

   One console port

4

   One USB port

5

  One PNP button

  NOTICE:

  To restore the factory settings and reset 

  the switch, hold down the button for at 

  least 6 seconds.

  To reset the switch, press the button.

  Resetting the switch will cause 

   service interruption. 

  Exercise caution when you press the 

  PNP button.

6

   Ground screw

   NOTE:

   It is used with a ground cable.

7

  Jack for AC power cable locking strap

  NOTE:

 The AC power cable locking strap is not

  delivered with the switch.

8

   AC socket

   NOTE:

   It is used with an AC power cabe .

    OMXD30000

 Huawei Optical Transceiver OMXD30000, SFP+, 10G,

 Multi-mode Module (850nm, 0.3km, LC)

   SFP-GE-LX-SM1310

 Optical Transceiver, eSFP, GE, Single-mode Module 

 (1310nm,  10km, LC)

 Transceiver , QSFP+ , 1310nm , 41.25Gbps ,  -7dBm , 2.3dBm , 

 -11.5dBm, LC, SMF, 10

  eSFP-GE-SX-MM850

 Optical Transceiver, eSFP, GE, Multi-mode Module

 (850nm,0.5km, LC)