S5735S-L24P4X-A1

Dimensions   without packaging

(H x W x D) [mm(in.)]

Basic   dimensions (excluding the parts   protruding from the body): 

43.6 mm x 442.0 mm   x 220.0 mm (1.72 in. x   17.4 in. x 8.7 in.)

Maximum   dimensions (the depth is the   distance from ports on the 

front panel to the   parts protruding from   the rear panel): 

43.6 mm x 442.0 mm x 227.0 mm (1.72   in. x   17.4 in. x 8.94 in.)

Dimensions   with packaging

(H x W x D) [mm(in.)]

90.0 mm x   550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)

Chassis height   [U]

1 U

Weight without   packaging

 [kg(lb)]

2.96 kg (6.53   lb)

Weight with   packaging

 [kg(lb)]

3.93 kg (8.66   lb)

Typical power   

consumption [W]

42.4 W

Typical heat   dissipation

 [BTU/hour]

144.67   BTU/hour

Maximum power   

consumption [W]

·        Not   providing the PoE function: 53.8 W

·        100% PoE   loads: 433.8 W (PoE: 380 W)

Maximum heat   

dissipation [BTU/hour]

·        Not   providing the PoE function: 183.57

·        100% PoE   loads: 1480.17

MTBF [year]

52.74 year

MTTR [hour]

2 hour

Availability

>0.99999

Noise at   normal 

temperature 

(acoustic power) [dB(A)]

50 dB(A)

Noise at   normal

 temperature 

(acoustic pressure) [dB(A)]

38.2 dB(A)

Number of card   slots

0

Number of   power slots

0

Number of fans   modules

2

Redundant   power supply

Not supported

Long-term   operating 

temperature [°C(°F)]

-5°C to +50°C   

(23°F to 122°F) at an altitude of 0-1800 m (0-5906  ft.)

Short-term   operating 

temperature [°C(°F)]

-5°C to +55°C   

(23°F to 131°F) at an altitude of 0-1800 m (0-5906 ft.)

Restriction on   

the operating 

temperature 

variation rate [°C(°F)]

When the   altitude is 1800-5000 m   (5906-16404 ft.), the highest

 operating temperature   reduces by 1°C (1.8°F) every   time the 

altitude increases by 220 m (722 ft.).

The equipment can operate beyond the normal operating 

temperature range for a short-term   period, but the following  

conditions must be met:

·        The equipment operates at a temperature of over 

          50°C (122°F) 

·        consecutively for at most 96 hours in one year.

·        The equipment operates at a temperature of over 

          50°C (122°F) 

         for a   total of no more than 360 hours in one year.

·        The equipment operates at a temperature of over 

          50°C     (122°F)  for no   more in 15 times in one year.

The equipment   may be damaged or experience  unexpected 

exceptions if any of the preceding   limits is exceeded.

The equipment   cannot start when the   temperature is lower 

than 0°C (32°F). 

The maximum   distance of optical modules   used in these 

conditions cannot exceed 10 km.

Storage   temperature

 [°C(°F)]

-40°C to +70°C   (-40°F to +158°F)

Long-term   operating 

relative humidity [RH]

5% to 95%,   noncondensing

Long-term   operating

 altitude [m(ft.)]

0-5000 m   (0-16404 ft.)

Storage   altitude

 [m(ft.)]

0-5000 m   (0-16404 ft.)

Power supply   mode

AC built-in

Rated input   

voltage [V]

·        AC input:   100 V AC to 240 V AC, 50/60 Hz

·         High-Voltage   DC input: 240 V DC

Input voltage   

range [V]

·         AC input:   90 V AC to 290 V AC, 45 Hz to 65 Hz

·         High-Voltage   DC input: 190 V DC to 290 V DC

Maximum input   

current [A]

6 A

Memory

512 MB

Flash memory

512 MB

Console port

RJ45

Eth Management port

Not supported

USB

Supported

RTC

Not supported

RPS input

Not supported

Service port   surge 

protection [kV]

98011318:

Common mode:   ±7 kV

98011318-001:

Common mode:   ±2 kV

Power supply   

surge protection [kV]

±6 kV in   differential mode, ±6 kV in common mode

Types of fans

Built-in

Heat   dissipation mode

Heat   dissipation with fan, intelligent fan speed adjustment

Airflow   direction

Air intake   from left and front, air exhaustion from right

PoE

Supported

Certification

EMC   certification

Safety   certification

Manufacturing   certification

3

   One console port

4

   One USB port

5

  One PNP button

  NOTICE:

  To restore the factory settings and reset the switch,

  hold down the button for at least 6 seconds.

  To reset the switch, press the button.Resetting the 

  switch will cause service interruption. 

  Exercise caution when you press the PNP button.

6

   Ground screw

   NOTE:

   It is used with a ground cable.

7

  Jack for AC power cable locking strap

8

   AC socket

   NOTE:

   It  is  used with an  AC  power cabe .

   OMXD30000

Huawei Optical Transceiver OMXD30000, SFP+, 10G, Multi-mode  Module

 (850nm, 0.3km, LC)

   SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module (1310nm,   10km, LC)

Transceiver, QSFP+, 1310nm, 41.25Gbps, -7dBm, 2.3dBm,   -11.5dBm

, LC, SMF, 10

  eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module (850nm,0.5km, LC)