S5731S-H48T4XC-A

Memory (RAM)

4 GB

Flash

 1 GB in total. To view the available flash memory size, 

 run the display   version command.

Mean time between failures (MTBF)

55.31 years

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±6 kV

Power supply surge protection

·     Using AC power modules: ±6 kV in differential mode, 

       ±6 kV in common mode

·     Using DC power modules: ±2 kV in differential mode,

       ±4 kV in common mode

Dimensions (H x W x D)

·     Basic dimensions

      (excluding the parts protruding from the body):

·      43.6 mm x 442.0 mm x 420.0 mm 

      (1.72 in. x 17.4 in. x 16.5 in.)

·      Maximum dimensions (the depth is the distance from 

       ports on the front panel to the handle on the rear panel):           

       43.6 mm x 442.0 mm x 448.0 mm 

      (1.72 in. x 17.4 in. x 17.7 in.)

Weight (with packaging)

9.5 kg (20.94 lb)

Stack ports

10GE SFP+ ports on the front panel,or ports on the rear card

RTC

Supported

RPS

Not supported

PoE

Not supported

Rated voltage range

·           AC input: 100 V   AC to 240 V AC,50/60 Hz

·           High-Voltage DC input: 240 V DC

·           DC input: -48 V DC to -60 V DC

Maximum voltage range

·           AC input: 90 V   AC to 290 V AC, 45 Hz to 65 Hz

·           High-Voltage DC   input: 190 V DC to 290 V DC

·           DC input: -38.4   V DC to -72 V DC

Maximum power consumption 

(100% throughput, full speed   of fans)

124 W  (without card)

Typical power consumption 

(30% of traffic load, tested   according to ATIS standard)

     101 W  (without card)

Operating temperature

-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m 

(0-5906 ft.)

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.),the highest 

operating temperature reduces by 1°C (1.8°F) every time the 

altitude increases by 220 m (722 ft.).

The switch cannot be started when the ambient temperature is 

lower than 0°C (32°F).

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal temperature 

(27°C, sound power)

< 57.5 dB(A)

Relative humidity

5% to 95%, noncondensing

Operating altitude

0-5000 m (0-16404 ft.)

Certification

·           EMC certification

·           Safety certification

·           Manufacturing certification

Part number

02352YRF

02352YRF-003

02352YRF-005

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch,

hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. 

Exercise caution when you press he PNP button.

7

Ground screw

NOTE:

It is used   with a ground   cable.

8

Rear card slot

NOTE:

Applicable  card:

·    ES5D21X08T00

·    ES5D21Q02Q00

·    S7X08000 (02312URW) 

    (applicable in V200R019C10

     and later versions)

·    S7X08000 (02312URW-002) 

    (applicable in V200R021C10SPC600

     and later versions)

·    S7Q02001 (02313UBW) 

    (applicable in V200R021C01

     and later versions)

·    S7Q02001 (02313UBW-002) 

    (applicable in V200R021C10SPC600

     and later versions)

9

Fan module slot 1

NOTE:

Applicable   fan   module: 

FAN-023A-B

(Fan box(B,FAN panel side exhaust))

10

Fan module slot 2

NOTE:

Applicable   fan   module: 

FAN-023A-B 

(Fan box(B,FAN panel side exhaust))

11

Power module slot 1

NOTE:

Applicable   power module:

·               PAC600S12-CB (600 W AC Power Module)         

·               PAC600S12-EB (600 W AC Power Module)

·              PAC600S12-DB (600 W AC Power Module) 

              (applicable in V200R020C10 and later versions)

·              PDC1000S12-DB (1000 W DC Power Module)

·              PAC150S12-R (150 W AC Power Module)

·              PDC180S12-CR (180 W DC Power Module) 

             (applicable in V200R020C00 and later versions)

Power module slot 2

NOTE:

Applicable   power module:

·             PAC600S12-CB (600 W AC Power Module)          

·             PAC600S12-EB (600 W AC Power Module)

·             PAC600S12-DB (600 W AC Power Module) 

             (applicable in V200R020C10 and later versions)

·             PDC1000S12-DB (1000 W DC Power Module)

·             PAC150S12-R (150 W AC Power Module)

·             PDC180S12-CR (180 W DC Power Module) 

            (applicable in V200R020C00 and later versions)

PAC600S12-CB

      600W AC Power Module(Back to Front, Power   panel side exhaust)

ES5D21Q02Q00

      2-port 40GE QSFP+ interface card

ES5D21X08T00

      8-port 10GE Base-T interface card

eSFP-GE-SX-MM850

     Optical Transceiver,eSFP,GE,Multi-mode   Module(850nm,0.55km,LC)

S-SFP-GE-LH40-SM1550

     Optical Transceiver,eSFP,GE,Single-mode   Module(1550nm,40km,LC)

SFP-GE-LX-SM1310

     Optical Transceiver,eSFP,GE,Single-mode   Module(1310nm,10km,LC)

SFP-GE-ZBXU1

     Optical Transceiver,eSFP,GE,BiDi   Single-mode Module(1490nm(Tx)/1570nm(Rx),80km,LC)

LE2MGSC40DE0

     Optical Transceiver,eSFP,GE,BIDI   Single-mode Module(TX1310/RX1490,40km,LC)

LE2MGSC40DE0

     Optical Transceiver,eSFP,GE,BIDI   Single-mode Module(TX1490/RX1310,40km,LC)

SFP-GE-LX-SM1310-BIDI

     Optical Transceiver,eSFP,GE,BIDI   Single-mode Module(TX1310/RX1490,10km,LC)

SFP-10G-iLR

     Optical Transceiver,SFP+,10G,Single-mode   Module(1310nm,1.4km,LC)

CWDM-SFPGE-1611

     CWDM Optical   Transceiver,eSFP,2.5G,Single-mode Module(1611nm,80km,LC)

SFP-10G-USR

     10GBase-USR Optical   Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC)

OMXD30000

     Optical Transceiver,SFP+,10G,Multi-mode   Module(850nm,0.3km,LC)

SFP-1000BaseT

     Electrical Transceiver,SFP,GE,Electrical   Interface Module(100m,RJ45)

OSX010000

     Optical Transceiver,SFP+,10G,Single-mode   Module(1310nm,10km,LC)