Huawei S5731S Series Switch S5731S-H24T4S-A
Huawei S5731S Series Switch S5731S-H24T4S-A
Huawei S5731S Series Switch S5731S-H24T4S-A
  • Huawei S5731S Series Switch S5731S-H24T4S-A
  • Huawei S5731S Series Switch S5731S-H24T4S-A
  • Huawei S5731S Series Switch S5731S-H24T4S-A

S5731S-H24T4S-A

S5731S-H24T4S-A is the Huawei S5731 switch, providing 24 × 10/100/1000BASE-T ports, 4 × GE SFP+, and 1 × 150W AC Power Supply. It’s a Distribution model.

Description

S5731S-H24T4S-A Overview


S5731S-H24T4S-A is the Huawei S5731 switch, providing 24 × 10/100/1000BASE-T ports, 

4 × GE SFP+, and 1 × 150W AC Power Supply. It’s a Distribution model.


S5731-H24T4XC Specification

 

Item

Description

Memory (RAM)

4 GB

Flash

 1 GB in total. To view the available flash memory size, 

 run the display   version command.

Mean time between failures (MTBF)

57.73 years

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±6 kV

Power supply surge protection

·     Using AC power modules: ±6 kV in differential mode, 

       ±6 kV in common mode

·     Using DC power modules: ±2 kV in differential mode,

       ±4 kV in common mode

Dimensions (H x W x D)

·     Basic dimensions

      (excluding the parts protruding from the body):

·      43.6 mm x 442.0 mm x 420.0 mm 

      (1.72 in. x 17.4 in. x 16.5 in.)

·      Maximum dimensions (the depth is the distance from 

       ports on the front panel to the handle on the rear panel):           

       43.6 mm x 442.0 mm x 448.0 mm 

      (1.72 in. x 17.4 in. x 17.7 in.)

Weight (with packaging)

9.35 kg (20.61 lb)

Stack ports

1000BASE-X ports on the front panel

RTC

Supported

RPS

Not supported

PoE

Not supported

Rated voltage range

·           AC input: 100 V   AC to 240 V AC,

·           High-Voltage DC input: 240 V DC

·           DC input: -48 V DC to -60 V DC

Maximum voltage range

·           AC input: 90 V   AC to 290 V AC, 45 Hz to 65 Hz

·           High-Voltage DC   input: 190 V DC to 290 V DC

·           DC input: -38.4   V DC to -72 V DC

Maximum power consumption 

(100%  throughput , full speed  of  fans)

91 W

Typical power consumption 

(30% of traffic load , tested according

 to ATIS standard)

     70 W

Operating temperature

-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m 

(0-5906 ft.)

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.),the highest 

operating temperature reduces by 1°C (1.8°F) every time the 

altitude increases by 220 m (722 ft.).

The switch cannot be started when the ambient temperature is 

lower than 0°C (32°F).

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal temperature 

(27°C, sound power)

< 57.5 dB(A)

Relative humidity

5% to 95%, noncondensing

Operating altitude

0-5000 m (0-16404 ft.)

Certification

·           EMC certification

·           Safety certification

·           Manufacturing certification

Part number

02353DJE

02353DJE-001

02353DJE-003

 

Product Details

Figure 1 shows the front panel of S5731S-H24T4S-A.

download.png

 

1

Twenty-four 10/100/1000BASE-T ports

2

Four 1000BASE-X ports

Applicable modules and cables:

·           GE optical module

·           GE-CWDM optical    module

·           GE-DWDM optical    module

·           GE copper module  

            (100M/1000M   auto-sensing)

·           10GE SFP+ optical  module

            (OSXD22N00 not supported)

·           1 m, 3 m, 5 m, and 10 m SFP+  

              high-speed copper cables

·           3 m and 10 m SFP+   AOC cables

·           0.5 m and 1.5 m SFP+  

             dedicated stack copper cables

·            (used for   zero-configuration stacking)

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch,

hold down the button for at least  6 seconds.

To reset   the switch, press the   button.

Resetting the switch will cause service interruption.

 Exercise caution when you press   the PNP   button.

7

Ground screw

NOTE:

It is used   with a ground   cable.

8

Fan module slot

NOTE:

Applicable  fan module:

FAN-023A-B (Fan box(B,FAN panel side exhaust))


9

Fan module slot 2

NOTE:

Applicable   fan   module: 

FAN-023A-B Fan Module

10

Power module slot 1

NOTE:

Applicable   power   module:

 600 W AC Power Module (PAC600S12-CB)

·    PAC600S12-CB (600 W AC Power Module)

·    PAC600S12-EB (600 W AC Power Module)

·    PAC600S12-DB (600 W AC Power Module) 

     (applicable in V200R020C10 and later versions)

·    PDC1000S12-DB (1000 W DC Power Module)

·    PAC150S12-R (150 W AC Power Module)

·    PDC180S12-CR (180 W DC Power Module) 

     (applicable in V200R020C00 and later versions)



11

Power module slot 2

NOTE:

Applicable   power module:

·    PAC600S12-CB (600 W AC Power Module)

·    PAC600S12-EB (600 W AC Power Module)

·    PAC600S12-DB (600 W AC Power Module) 

     (applicable in V200R020C10 and later versions)

·    PDC1000S12-DB (1000 W DC Power Module)

·    PAC150S12-R (150 W AC Power Module)

·    PDC180S12-CR (180 W DC Power Module) 

    (applicable in V200R020C00 and later versions)




 

Applicable Modules

Table 3 shows the recommended modules.

 

Model

Description

OMXD30000

Huawei Optical Transceiver OMXD30000, SFP+, 10G, Multi-mode   Module

 (850nm, 0.3km, LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module (1310nm,   10km, LC)

OMXD30009

Transceiver , QSFP+ , 1310nm , 41.25Gbps , -7dBm , 2.3dBm ,   -11.5dBm , LC , SMF , 10

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module (850nm,0.5km,   LC)

 

Get More Information

Do you have any question about the Huawei S5731S-H24T4S-A?

Contact us now via Live Chat or andy@ryderwell.com.



send inquiry to us

Related Product

Chat with us