S5731S-H48T4X-A Overview
CloudEngine S5731-H series switches are brand-new enhanced gigabit access
switches that provide all-GE electrical downlink ports, fixed 10GE uplink ports,
and one extended slot. CloudEngine S5731-H delivers gigabit connectivity at
the aggregation or access layer in large and midsize campuses, at the core
layer in branches and small campuses, and at the access layer in data centers.
Integrating native WLAN AC capabilities to support up to 1024 WLAN APs,
CloudEngine S5731-H enables you to converge your wired and wireless
networks for simplified operations.
S5731S-H48T4X-A Specification
Item | Description |
Memory (RAM) | 4 GB |
Flash | 1 GB in total. To view the available flash memory size, run the display version command. |
Mean time between failures (MTBF) | 55.31 years |
Mean time to repair (MTTR) | 2 hours |
Availability | > 0.99999 |
Service port surge protection | Common mode: ±6 kV |
Power supply surge protection | · Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode · Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode |
Dimensions (H x W x D) | · Basic dimensions (excluding the parts protruding from the body): · 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) · Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.7 in.) |
Weight (with packaging) | 9.5 kg (20.94 lb) |
Stack ports | 10GE SFP+ ports on the front panel |
RTC | Supported |
RPS | Not supported |
PoE | Not supported |
Rated voltage range | · AC input: 100 V AC to 240 V AC, 50/60 Hz · High-Voltage DC input: 240 V DC · DC input: -48 V DC to -60 V DC |
Maximum voltage range | · AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz · High-Voltage DC input: 190 V DC to 290 V DC · DC input: -38.4 V DC to -72 V DC |
Maximum power consumption (100% throughput, full speed of fans) | 124 W |
Typical power consumption (30% of traffic load, tested according to ATIS standard) | 101 W |
Operating temperature | -5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.),the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). |
Storage temperature | -40°C to +70°C (-40°F to +158°F) |
Noise under normal temperature (27°C, sound power) | < 57.5 dB(A) |
Relative humidity | 5% to 95%, noncondensing |
Operating altitude | 0-5000 m (0-16404 ft.) |
Certification | · EMC certification · Safety certification · Manufacturing certification |
Part number | 02353HVJ 02353HVJ-003 02353HVJ-005 |
Product Details
Figure 1 shows the appearance of S5731S-H48T4X-A.
1 | Forty-eight 10/100/1000BASE-T ports | 2 | Four 10G SFP+ ports Applicable modules and cables: · GE optical module · GE-CWDM optical module · GE-DWDM optical module · GE copper module (100M/1000M auto-sensing) · 10GE SFP+ optical module (OSXD22N00 not supported) · 10G-CWDM optical module · 10G-DWDM optical module · 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables · 3 m and 10 m SFP+ AOC cables · 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking) |
3 | One console port | 4 | One ETH management port |
5 | One USB port | 6 | One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercisecaution when you press the PNP button. |
7 | Ground screw NOTE: It is used with a ground cable. | 8 | Fan module slot NOTE: Applicable fan module: FAN-023A-B (Fan box(B,FAN panel side exhaust)) |
9 | Fan module slot 2 NOTE: Applicable fan module: FAN-023A-B (Fan box(B,FAN panel side exhaust)) | 10 | Power module slot 1 NOTE: Applicable power module: · PAC600S12-CB (600 W AC Power Module) · PAC600S12-EB (600 W AC Power Module) · PAC600S12-DB (600 W AC Power Module) (applicable in V200R020C10 and later versions) · PDC1000S12-DB (1000 W DC Power Module) · PAC150S12-R (150 W AC Power Module) · PDC180S12-CR (180 W DC Power Module) (applicable in V200R020C00 and later versions) |
11 | Power module slot 2 NOTE: Applicable power module: · PAC600S12-CB (600 W AC Power Module) · PAC600S12-EB (600 W AC Power Module) · PAC600S12-DB (600 W AC Power Module) (applicable in V200R020C10 and later versions) · PDC1000S12-DB (1000 W DC Power Module) · PAC150S12-R (150 W AC Power Module) · PDC180S12-CR (180 W DC Power Module) (applicable in V200R020C00 and later versions) |
Applicable Modules
Table 2 shows the recommended modules.
Model | Description |
Huawei Optical Transceiver OMXD30000, SFP+, 10G, Multi-mode Module (850nm, 0.3km, LC) | |
Optical Transceiver, eSFP, GE, Single-mode Module (1310nm, 10km, LC) | |
Transceiver , QSFP+ , 1310nm , 41.25Gbps , -7dBm , 2.3dBm , -11.5dBm , LC , SMF , 10 | |
Optical Transceiver, eSFP, GE, Multi-mode Module (850nm,0.5km, LC) |
Get More Information
Do you have any question about the Huawei S5731S-H48T4X-A?
Contact us now via Live Chat or andy@ryderwell.com.
