S5731-S32ST4X-A Overview
S5731-S32ST4X-A (8 10/100 / 1000Base-T Ethernet port, 24 Gigabit SFP, 4 10
Gigabits SFP +, AC power supply, front maintenance).
The Huawei CloudEngine S5731-S series switches were developed based on
next-generation high-performing hardware and the Huawei Versatile Routing
Platform (VRP).
S5731-S32ST4X-A Specification
Item | Specification |
Dimensions without packaging (H x W x D) [mm(in.)] | Basic dimensions (excluding the parts protruding from the body) : 43.6 mm x 442.0 mm x 220.0 mm (1.72in. x 17.40 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.40 in. x 8.94 in.) |
Dimensions with packaging (H x W x D) [mm(in.)] | 90 mm x 550 mm x 355 mm (3.54 in. x 21.65 in. x 13.98 in.) |
Chassis height [U] | 1 U |
Weight without packaging [kg(lb)] | 3.13 kg (6.90 lb) |
Weight with packaging [kg(lb)] | 4.49 kg (9.90 lb) |
Typical power consumption [W] | 66.85 W |
Typical heat dissipation [BTU/hour] | 228.10 BTU/hour |
Maximum power consumption [W] | 93.92 W |
Maximum heat dissipation [BTU/hour] | 320.46 BTU/hour |
MTBF [year] | 32.56 year |
MTTR [hour] | 2 hour |
Availability | >0.99999 |
Noise at normal temperature (acoustic power) [dB(A)] | 41.42 dB(A) |
Noise at normal temperature (acoustic pressure) [dB(A)] | 27.74 dB(A) |
Number of card slots | 0 |
Number of power slots | 0 |
Number of fans modules | 2 |
Redundant power supply | Not supported |
Long-term operating temperature [°C(°F)] | -5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) |
Short-term operating temperature [°C(°F)] | -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.) |
Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The device can work for a short period of time when the operating temperature is beyond the normal range, but the following conditions must be met: · The operating temperature can exceed 45°C (113°F) for a maximum of 96 consecutive hours in a year. · The total time when the operating temperature exceeds 45°C(113°F) in a year is less than or equal to 360 hours. · The number of times the operating temperature exceeds 45°C(113°F) is less than or equal to 15 in one year. If any of the preceding conditions is not met, the device may be damaged or an unknown error may occur. Devices cannot start when the temperature is lower than 0°C(32°F).The maximum transmission distance of an optical module used for short-term operation cannot exceed 10 km. |
Storage temperature [°C(°F)] | -40°C to +70°C(-40°F to +158°F) |
Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
Long-term operating altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
Power supply mode | AC built-in |
Rated input voltage [V] | - AC input: 100 V AC to 240 V AC, 50/60 Hz |
Input voltage range [V] | - AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz |
Maximum input current [A] | 3 A |
Memory | 2 GB |
Flash memory | The physical space is 1 GB. You can run the display version command to view the actual available space. |
Console port | RJ45 |
Eth Management port | RJ45 |
USB | Not supported |
RTC | Supported |
RPS input | Not supported |
Service port surge protection [kV] | Common mode: ±7 kV |
Power supply surge protection [kV] | ±6 kV in differential mode; ±6 kV in common mode |
Types of fans | Built-in |
Heat dissipation mode | Heat dissipation with fan, intelligent fan speed adjustment |
Airflow direction | Air intake from the front and left and air exhaust from the right |
PoE | Not supported |
Certification | EMC certification Safety certification Manufacturing certification |
Product Details
Figure 1 shows the appearance of S5731-S32ST4X-A.
1 | Eight 10/100/1000BASE-T ports | 2 | Twenty-four 100/1000BASE-X ports |
3 | Four 10GE SFP+ ports | 4 | One console port |
5 | One ETH management port | 6 | One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. |
7 | AC socket NOTE: It is used with an AC power cable. | 8 | Ground screw NOTE: It is use with a ground cable. |
Get More Information
Do you have any question about the Huawei S5731-S32ST4X-A?
Contact us now via Live Chat or andy@ryderwell.com.