Huawei S5731-H Series Switch S5731-H48P4XC
Huawei S5731-H Series Switch S5731-H48P4XC
Huawei S5731-H Series Switch S5731-H48P4XC
  • Huawei S5731-H Series Switch S5731-H48P4XC
  • Huawei S5731-H Series Switch S5731-H48P4XC
  • Huawei S5731-H Series Switch S5731-H48P4XC

S5731-H48P4XC

Huawei S5731-H48P4XC (48*10/100/1000BASE-T ports, 4*10GE SFP+ ports, 1*expansion slot, PoE+, without power module)

Description

S5731-H48P4XC Overview


The CloudEngine S5731-H series switches are the next-generation intelligent gigabit 

fixed switches developed by Huawei. The CloudEngine S5731-H builds on Huawei's 

unified Versatile Routing Platform (VRP) and boasts various IDN features.


S5731-H48P4XC Specification

 

Item

Description

Memory (RAM)

4 GB

Flash

 1 GB in total. To view the available flash memory size, 

 run the display   version command.

Mean time between 

failures (MTBF)

54.96 years

Mean time to 

repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge 

protection

Common mode: ±6 kV

Power supply surge 

protection

·     Using AC power modules:

       ±6 kV in differential mode, 

       ±6 kV in common mode

·     Using DC power modules:

       ±2 kV in differential mode,

       ±4 kV in common mode

Dimensions (H x W x D)

·     Basic dimensions

      (excluding the parts protruding from the body):

·      43.6 mm x 442.0 mm x 420.0 mm 

      (1.72 in. x 17.4 in. x 16.5 in.)

·      Maximum dimensions 

     (the depth is the distance from 

       ports on the front panel to the handle 

       on the rear panel):           

       43.6 mm x 442.0 mm x 448.0 mm 

      (1.72 in. x 17.4 in. x 17.7 in.)

Weight (with packaging)

8.8 kg (19.40 lb)

Stack ports

10GE SFP+ ports on the front panel, 

or ports on the rear card

RTC

Supported

RPS

Not supported

PoE

Supported

Rated voltage range

·           AC input: 100 V   AC to 130 V AC,

            200 V  AC to 240V AC,50/60 Hz

·           High-Voltage DC input: 240 V DC

·           DC input: -48 V DC to -60 V DC

Maximum voltage range

·           AC input: 

           90 V   AC to 290 V AC, 45 Hz to 65 Hz

·           High-Voltage DC   input:

           190 V DC to 290 V DC

·           DC input: -38.4   V DC to -72 V DC

Maximum power consumption 

(100% throughput, 

full speed of fans)

·          Not providing the PoE function:

          132 W (without card)

      ·         100% PoE loads: 1750 W (PoE:

               1440 W, without card)


Typical power consumption 

(30% of traffic load, tested   

according to ATIS standard)

108 W (without card)

Operating temperature

-5°C to +45°C (23°F to 113°F) at an altitude

 of 0-1800 m (0-5906 ft.)

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.),

the highest operating temperature reduces by 1°C 

(1.8°F) every time the altitude increases by 220 m

(722 ft.).

The switch cannot be started when the ambient 

temperature is lower than 0°C (32°F).

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal

temperature 

(27°C, sound power)

< 62.3 dB(A)

Relative humidity

5% to 95%, noncondensing

Operating altitude

0-5000 m (0-16404 ft.)

Certification

·           EMC certification

·           Safety certification

·           Manufacturing certification

Part number

02352SVD

02352SVD-001

02352SVD-003

 

Product Details

Figure 1 shows the appearance of S5731-H48P4XC.

download (1).png

1

Forty-eight  PoE+ 

10/100/1000BASE-T ports

2

Four 10GE SFP+ ports

Applicable modules and cables:

·           GE optical module

·           GE-CWDM optical module

·           GE-DWDM optical module

·           GE copper module  

             (100M/1000M   auto-sensing)

·           10GE SFP+ optical        module

             (OSXD22N00 not supported)

·           10GE-CWDM optical module

·           10GE-DWDM optical module

·           1 m, 3 m, 5 m, and 10 m SFP+  

             high-speed copper cables

·           3 m and 10 m SFP+ AOC cables

·           0.5 m and 1.5 m SFP+ 

            dedicated stack copper cables

·          (used for zero-configuration stacking)

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings 

and reset the switch,hold down 

the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause 

service interruption. Exercise

caution when you press the PNP button.

7

Ground screw

NOTE:

It is used with a ground cable.

8

Rear card slot

NOTE:

Applicable   card:

·           ES5D21X08T00

·           ES5D21Q02Q00

·           S7X08000 (02312URW)

 (applicable in V200R019C10 

  and later   versions)

· S7X08000 (02312URW-002) 

(applicable in V200R021C10SPC600 

 and later versions)

· S7Q02001 (02313UBW) 

(applicable in V200R021C01 

 and later versions)

· S7Q02001 (02313UBW-002) 

(applicable in V200R021C10SPC600 

 and later versions)



9

Fan module slot 1

NOTE:

Applicable fan module:

 FAN-023A-B 

(Fan box(B,FAN panel

 side exhaust))

10

Fan module slot 2

NOTE:

Applicable fan module: FAN-023A-B 

(Fan box(B,FAN panel side exhaust))

11

Power module slot 1

NOTE:

Applicable   power module:

·    PAC1000S56-CB 

     (02312KND: 1000 W PoE AC

     Power Module)

·    PAC1000S56-CB 

     (02312KND-001: 

     1000 W PoE AC Power Module)

·    PAC1000S56-DB 

     (1000 W PoE AC Power Module) 

     (applicable in V200R020C10 

      and later versions)

·    PDC1000S56-CB 

     (1000 W PoE DC Power Module) 

     (applicable in V200R021C00 

      and later versions)

·    PAC600S56-CB 

    (600 W AC&240 V DC

     Power Module 

    (Back to Front, 

     Power panel side exhaust)) 

    (applicable in V200R021C10 

     and later versions)

12

Power module slot 2

NOTE:

Applicable power module:

·    PAC1000S56-CB 

     (02312KND: 1000 W PoE 

       AC Power Module)

·    PAC1000S56-CB 

     (02312KND-001: 1000 W 

      PoE AC Power Module)

·    PAC1000S56-DB 

     (1000 W PoE AC Power Module) 

     (applicable in V200R020C10 

      and later versions)

·    PDC1000S56-CB 

     (1000 W PoE DC Power Module)

     (applicable in V200R021C00 

      and later versions)

·   PAC600S56-CB 

     (600 W AC&240 V DC Power Module 

     (Back to Front, Power panel side 

      exhaust)) 

     (applicable in V200R021C10 

      and later versions)

 

Applicable Modules

Table 2 shows the recommended modules.

Model

Description

eSFP-GE-SX-MM850

Optical Transceiver,eSFP,GE,Multi-mode Module

(850nm,0.55km,LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver,eSFP,GE,Single-mode Module

(1550nm,40km,LC)

SFP-GE-LX-SM1310

Optical Transceiver,eSFP,GE,Single-mode Module

(1310nm,10km,LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver,eSFP,GE,Single-mode Module

(1310nm,40km,LC)

S-SFP-GE-LH80-SM1550

Optical Transceiver,eSFP,GE,Single-mode Module

(1550nm,80km,LC)

SFP-GE-ZBXU1

Optical Transceiver,eSFP,GE,BiDi Single-mode Module

(1490nm(Tx)/1570nm(Rx),80km,LC)

SFP-GE-LX-SM1490-BIDI

Optical Transceiver,eSFP,GE,BIDI Single-mode Module

(TX1490/RX1310,10km,LC)

SFP-GE-ZBXD1

Optical Transceiver,eSFP,GE,BIDI Single-mode   Module

(1570nm(Tx)/1490nm(Rx),80km,LC)

LE2MGSC40DE0

Optical Transceiver,eSFP,GE,BIDI Single-mode   Module

(TX1310/RX1490,40km,LC)

SFP-GE-LX-SM1310-BIDI

Optical Transceiver,eSFP,GE,BIDI Single-mode   Module

(TX1310/RX1490,10km,LC)

SFP-GE-BXU1-SC

1000Base,BIDI Optical Transceiver,SFP,GE,Single-mode   

Module(TX1490nm/RX1310nm,10km,SC)

SFP-10G-iLR

Optical Transceiver,SFP+,10G,Single-mode Module

(1310nm,1.4km,LC)

SFP-10G-USR

10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode 

Module(850nm,0.1km,LC)

SFP-1000BaseT

Electrical Transceiver,SFP,GE,Electrical Interface   Module

(100m,RJ45)

OMXD30000

Optical Transceiver,SFP+,10G,Multi-mode 

Module(850nm,0.3km,LC)

OSX010000

Optical Transceiver,SFP+,10G,Single-mode

   Module(1310nm,10km,LC)

 

Get More Information

Do you have any question about the Huawei S5731-S48T4X ?

Contact us now via Live Chat or andy@ryderwell.com.

 




send inquiry to us

Related Product

Chat with us